TN2(22/25/30)
Push button switch
  . Series control components
  . Push button switch
  . Illuminated push button
(Direct power)
  . Illuminated push button
(With transformer)
  . Selector switch
  . Illuminated selector switch
(Direct power)
  . Illuminated selector switch
(With transformer)
  . Pilot lamp(Direct power)
  . Pilot lamp
  . Joystick
  . 22mm Insulated enclosures
  . 22mm Control stations
  . Name plates
  . Name plates

 

 

‘‘‘‘The mounting holes of this series of insulated enclosures are Ø22mm.Single-hole insulated enclosure is available in the yellow and gray.ALL the others are in gray.The contact blocks are of exclusive type,which is different from those of Ø22/30series control components.The dimension and type of the upper base are same as thoes ofØ22/Ø30 series control components.
 
‘€The assembly of insulated enclosures and switch
1.Take apart upper cover and the lower base of the insulated enclosures.
2.Fix the contact block on the lower base into one kit.
3.Connect the upper cover with the lower base into one kit.
. The protection structure for this series of insulated enclosures is IP65(IEC144).
. All the illuminated switches in the insulated enclosures are direct type.
Standard contact block for insulated enclo- sures Illuminted contact block for insulated enclosures
Lamp holder blocks(for insulated enclo-sures) Cable gland
Insulated enclosures dimensions TN2:Ø22mm TN3: Ø30 mm
Type
A
B
C
D
E
F
G
H
TN2-B1
TN3-B1
82
75
67.3
43.5
41
63
54
TN2-B2
TN3-B2
127
75
67.3
43.5
41
45
108
54
TN2-B3
TN3-B3
172
75
67.3
43.5
41
45
153
54
TN2-B4
TN3-B4
217
75
67.3
43.5
41
45
198
54
TN2-B5
TN3-B5
262
75
67.3
43.5
41
45
243
54
 
‘ώ TEND TECHNOLOGY CO., LTD. ‘ώ